Single-phase plastering machine for ready-mixed dry plasters
The single-phase B 30, a winning product!
The single-phase B30 is a compact plastering machine, easy to use, it’s ideal to mix, pump and spray dry ready-mixed plasters continuously on internal and external walls. It can be used manually
with bags or in automatic mode using silos. Designed to work at 3 speeds, it can be used for a wide variety of materials: lime and cement based plasters, gypsum, anhydrite, insulating plasters, masonry mortar joint fi lling mortars, cement, and anhydrite based self-levelling screeds.
The more air the better the performance
The single-phase B30 is the only plastering machine on the market with a Boxer membrane compressor that supplies up to 280 liters of air per minute. The compressor, being powered directly by the screw pump motor, allowed Bunker’s technicians to eliminate an electric motor.
Performances are similar to a three-phase machine.
Applications
- Traditional or pre-mixed application of plaster and filling joints
- Injections of cement grouting
- Pumping mortar and isolating materials
Technical Data
Choosing the Bunker single-phase B30 means that you can count on a reliable machine built in compliance with the CEE directives ready to face a wide variety of difficult work. Thanks to the best components and strong frame painted with epoxy dust, the single-phase B30 is a durable high quality product.
The single-phase B30 is easy to dismount into single parts and can be reassembled on the construction site by a single operator without any tool or effort. This solution makes cleaning and maintenance much easier.
The electric control box is ergonomic and well protected. Using a speed selector, the user can change the pumping speed so that it can work
with different outputs.
All small items can be stored in the drawer located under the machine.
Accessories
A wide variety of accessories are supplied with the machine and increase its performances:
-
Pipelines
-
Rubber nozzles
-
Sponge ball
-
Tools
-
Pressure gauge
-
Hopper extension
-
Control box key
-
Curved spatula
-
Water faucet connector
-
Cleaning shaft
-
Spray gun and cleaning brush
-
Cleaning connector DN35-geka
-
Manometer
-
Mixing shaft
-
T-wrench for cleaning shaft
| single-phase B 30 | |
|---|---|
| Pump motor | 4,00 kW controlled through the inverter |
| Star wheel electric motor | 0,30 kW – 12 revolutions controlled through the inverter |
| Water pump motor | 0,33 kW |
| Air compressor | 280 L/min |
| Theoretical maximum output | 16 – 18 – 20 L/min * |
| Pumping distance with conical hose Ø 35-25 | 25 m * |
| Maximum pumping pressure | 20 bar |
| Hopper capacity | 150 L (with 200 liter extension) |
| Load height | 880 mm |
| Dimensions W x L x H mm | 1100x660x1565 |
| Total weight | 268 Kg |
| Individual unit weight: | Machine: 168 Kg |
| Mixer Pump: 100 Kg |
* With D 5-2.5 stator and rotor. Depends on the material, consistency and the diameter of the hoses. The performance is guaranteed with the Bunker stators and rotors.
B30 Intonacatrice monofase per premiscelati